Jiangsu Hongbo Communication Technology Co., Ltd

Available to adjust producing technique according to special requirements on FRP products!

E-mail: info@hongbofrp.com
Home > News > Content
Fiberglass Tubes Anti-aging Properties
- Aug 03, 2017 -

Fiberglass Tubes Anti-aging properties

Glass fiber pipe features:

1, good corrosion resistance. As the main raw material of glass fiber reinforced polymer components of unsaturated polyester resin and glass fiber composition, can effectively resist the acid, alkali, salt and other media corrosion and untreated domestic sewage, corrosive soil, chemical wastewater and many chemical liquid Of the erosion, in general, to maintain long-term safe operation.

2, anti-aging properties and good heat resistance. Glass fiber pipe can be -40 ℃ ~ 70 ℃ temperature range of long-term use, the use of special formula of high temperature resin can also be more than 200 ℃ temperature normal work.

3, good frost resistance. In the minus 20 ℃ below the tube will not freeze after freezing.

4, light weight, high strength. Relative density between 1.5 to 2.0, only carbon steel 1/4 ~ 1/5, but the tensile strength is close, even more than carbon steel, and the specific strength can be compared with the high alloy steel. Therefore, in the aviation, rockets, space vehicles, high pressure vessels and other products need to reduce their weight applications, have excellent results.

5, can be designed to be good. Can be flexible to design a variety of structural products to meet the requirements, can make the product has a good overall.

6, good wear resistance. To contain a large number of mud, sand and water, into the tube for the impact of rotating wear test. After 3 million revolutions, the depth of wear of the inner wall of the test tube is as follows: 0.53mm with tar and enamel coated steel pipe, 0.52mm with epoxy and tar coated steel pipe, surface hardened steel pipe for glass pipe Is 0.21mm. Which FRP wear resistance is good.

7, good electric insulation. FRP is non-conductor, the electrical insulation of the pipeline is excellent, the insulation resistance is 1012-1015Ω.cm, the most suitable for the transmission, the telecommunication line density area and the multi-mine area FRP heat transfer coefficient is very small, only 0.23, Fifth, the pipe insulation performance is excellent.

    Glass fiber pipe is a kind of carbon fiber tube, in daily life is also widely used. Want to compare the traditional pipeline materials, the glass fiber pipe has the following characteristics:

    1. Strong corrosion resistance. As the glass fiber pipe corrosion resistance is very strong resin as one of the main raw materials, it has a strong corrosion resistance, in strong acid, alkali and other working environment, can not be eroded and interference in the mechanical properties and processing Features have a unique advantage.

    2. Strong heat and cold resistance. Glass fiber reinforced plastic pipe in the very high temperature and very low temperature, can work properly, by the external temperature of the smaller, so the environment is very good adaptability.

    3. Strong corrosion resistance. As the glass fiber pipe corrosion resistance is very strong resin as one of the main raw materials, it has a strong corrosion resistance, in strong acid, alkali and other working environment, can not be eroded and interference in the mechanical properties and processing Features have a unique advantage.